Ashly NE4250.70 Ne2rk Enabled 4 Channel Power Amplifier for sale in Cheshire, CT
Ashly NE4250.70 Network Enabled 4 Channel Power Amplifier 250 Watts at 70V NE4250.70The four-channel power amplifier shall deliver a minimum power of 250 Watts RMSper channel into 70V loads with all channels operating. When switched intobridged-mono mode, channels 1+2 or 3+4 of the amplifiershall deliver at least 500 Watts RMS into a 140V load. The power amplifiershall include Euroblock input connectors and Euroblock output connectors. Itshall have balanced analog inputs. The power amplifier shall have remotestandby for power up, DC remote level control and contact closure presetrecall. It shall have Ethernet control and monitoring of power functions,level, mute, polarity, temperature, current, andamplifier fault conditions. Frequency response shall be 20Hz to 20kHz ±1.0dB.Signal-to-Noise shall be greater than 105dB unweighted and SMPTEintermodulation distortion shall be less than 0.5% into an 8 Ohm load, 10dBbelow rated output. The front panel shall provide the status of power, standby,protect, power switch disable, signal level, bridge, over-temperature,over-current, and Ethernet communication. The power amplifierwill be capable of having factory installed AES3, CobraNet®, or Dante®interface options with the addition of a 4-Channel DAC card. The amplifiershall mount in a standard 19 inch rack using two spaces (3.5. high) andweigh 23 pounds (10.4kg) or less. Features: 10/100Ethernet is Standard Extensiveprotection circuitry Safety/Compliance:FCC, CE, RoHS OptionalCobraNet, EtherSound, AES/EBU, mic preamps Levelattenuators for each channel Power switchcan be disabled by software 4-StepSignal Level and Clip LEDs Euroblockinputs/outputs Remote levelcontrol Presetrecall Remote powerturn-on/off Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping -Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days Returns/Refunds - If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping . Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid
|
|
|